Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. However when windows with Double Glazed Window Repairs Near Me panes are secured by internal beading, it will be more difficult to take out the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards will fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is significant, you may want to use security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a number of problems such as sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need to open the window to access the frame. After that, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, tighten the screws until they stay in place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism wears out. It's fairly simple to fix a loose upvc window repair near me handle. First, you'll need to shut the window and then perform an initial fitting. The corners of the sash need to align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and wet floors. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on how serious the issue is, old caulking may have to be removed. When it comes to uPVC repair, you should avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze It could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should open.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you suggestions.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also lower the possibility of a window repairs getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause a gap to form where the sash joins the frame. If they are beyond repair, it may be required to realign them. The interlock, which is located on the hinge of the window and can also be misaligned, and again it is feasible to give them a clean but in some instances it could be necessary to have these replaced.

The next most common reason for draughts are the window seals, these can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to realize that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as possible.