Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to access the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and verify the an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also loosen. Often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and then perform a test fit. The corner joints of the sash should align with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you awake each day to discover mouldy walls and floors that are wet. Windows that leak water do are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the old caulking might need to be removed before a fresh layer is applied. It is crucial to keep in mind that when it is about upvc window repairs [https://plantsg.com.sg/], you should not be tempted to 'over-caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal rather than the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in a breeze. They can be easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is essentially a very simple process, but it's easier with someone else to help you hold the frame in place.

Check that the uPVC hinges are open and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation at the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes gaps to develop between the sash and the frame. If they are beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be misaligned. This is located on the hinge side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.