Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need to locate some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your home until a professional is able to repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they are susceptible to a range of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to open the windows to get at the frame. After that, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit of your window, tighten the screws to keep them in the right position.

If you can't reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corners of the sash should align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find a smoky wall and wet floors. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on how severe the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and ensure that the sill pan is properly angled to drain away from the window repairs near me. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more with the seal than the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change the hinges on a window but it's much simpler if you have someone to help you hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us a photo via our website will often solve the issue. We are always happy to provide assistance.

It is also important to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form where the sash meets the frame. If they're beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

The next most common cause of draughts is the window seals. They can become worn down or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.