peugeot 307 key 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped working, it could be due to a dead battery in the coin-cell unit, water damage, receiver modules issues, or even a defective chip. These are all simple fixes and you can get your car back up to speed in no time!

Car keys can also fail because the blade of the key gets worn. You can fix this problem by visiting your local Car Key Man Auto Locksmith to install a new blade.

Battery

The battery that powers the key fob on your Peugeot 308 can sometimes die or become too weak to send an effective signal to the car. This could cause the key fob to stop functioning, preventing you from opening and locking the doors or even starting your engine. You'll need a replacement battery for the key fob in order to fix this.

You can purchase a new battery at an auto parts shop, or at your local hardware store. When you purchase the battery, make sure that it's brand new and hasn't been sitting on the shelf for too long. A new battery will have more capacity and be able to send a more powerful signal to the car.

After replacing the battery try unlocking the doors and locking them using the key fob. If the doors aren't unlocking it's likely that the receiver module in the car is the culprit. Your local peugeot car key replacement cost dealer can reprogram the receiver module.

It's also possible that the key fob's internal chip is damaged. This could happen if you drop your key fob on the ground or expose it to water. The rubber seals that protect your chip from moisture could get worn out over time. This is especially the case when you expose your key fob to water over long periods of time, such as swimming it in the ocean. To avoid this, you should keep your key fob away of moist areas and away from water.

Water Damage

If your key fob gets soaked regardless of whether you dropped it in the pool or threw it into a puddle, don't assume it's a loss. The key fob is protected by rubber seals however, prolonged exposure to water could cause damage to its electronic chip. Because water is a good conductor, any water that is able to get inside the key fob can result in a series of short circuits that eventually ruin the chip. After taking the battery out, clean the contacts with isopropyl ethanol and dry it completely before putting it back in.

A dead battery might be the reason why your Peugeot 308 won't start. If you have an extra car, jumper cables could be used to get the engine working again. If you suspect that the battery is at fault then it must be replaced.

Another reason could be a bad receiver in the vehicle, which could stop it from receiving a signal from the key fob. The key fob might be damaged or there might be an issue with the antenna, wiring or even the key fob itself. It is possible to program a new keyfob to your vehicle if using one. If you are unable to solve the issue, call an expert technician. A trained technician will be able diagnose the problem quickly and fix it promptly.

Radio Interference

For example, a keys not being recognized or having a narrow range often mean that there is an interference in the system. This can be either radiated, or conducted, with the latter resultant from power supply cables or speaker wiring that is too close to electrical components. Generally, rerouting the cables or moving them further away from the components may solve the issue.

It's unlikely someone is watching your key fob signal in the intention of stealing your car It's possible, however, that radio interference has ruined the signal. This is a simple problem to fix.

If you're experiencing a problem with your key fobs that aren't being recognized, try using a fresh battery. Also, ensure that the battery is of the correct size and type. Batteries of the wrong size can cause damage to your device.

These devices may interfere with the key signal if they operate on the same radio frequency. It is best to avoid attaching these devices to your key fob.

Pairing Issues

A car's remote keyless entry system is an antenna that receives radio frequency signals from the key fob. If this receiver develops a problem, you won't be able to start your car even if the key fob is working and can be changed. The issue can result from a variety of things, including the battery of a coin that is dead and water damage. The receiver may be malfunctioning because of an error in the software or internal damage to the key itself.

The battery inside your Peugeot 308 keyfob may have been drained. You can easily replace this with a brand new battery but it's essential to choose the right battery for your key fob. It is recommended to use a battery that is the same size as well as voltage and specifications as the original.

Another reason that the reason your peugeot boxer replacement key 308 key fob might not be working is due to the fact that it has been paired to a different car. It is possible that you have accidentally given your key fob someone else or the key was used to unlock other vehicles. This can be solved by reprogramming the key fob using an OBDII scan. This tool will usually ask you for specific information regarding your vehicle, for example the VIN or engine type, and it's crucial that you enter this information correctly.