Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. It is discreet and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin sequence that can be altered up to 20 times. This will then allow the start-up of your vehicle.

Simple PIN Code Change Process

With the rising rate of vehicle thefts, many owners are looking to improve their security. There are many different types of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system may help you locate your car if it is stolen however it cannot stop the crime. An immobiliser, on other hand does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The autowatch ghost immobiliser fitting Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your vehicle.

The ghost device uses the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be done by using the window, heater or indicator stalk buttons. In addition option, there is an app on mobile that can act as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This option is particularly beneficial if you have to hand your car over to a valet service or maps.google.com.om parking since the immobiliser is activated, but not disabled.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a separate unit. It is not only an effective deterrent for vehicle theft and vandalism, but it can also be used on any future vehicles you own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof small device

The Autowatch ghost immobiliser is an advanced security device that protects your pride and joy against key cloning, hacking & ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to get around the immobilisers in place.

The advantage of CAN data over conventional systems is that they operate silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by conventional diagnostic tools. The Autowatch ghost does not produce LEDs, but instead utilizes the buttons in your vehicle, such as the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. You can even create a sequence that is up to 20 presses long for added security. The iPhone app is limited to one connection, with an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost prevents car thieves adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service for servicing without the need to enter a pin code.

Tested for each vehicle

The Autowatch ghost immobiliser near me is the world's first aftermarket immobiliser for CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects signals to prevent your car from starting up normally until you enter a customized code. The system can be turned on or off via your smartphone's app, without the need for extra wires.

Standard factory immobilisers in automobiles function through a transponder built into the key, which sends a signal to the ECU. The car will start when the correct code is transmitted. However, if the transponder of a different vehicle is used instead, the immobiliser won't recognise it. This allows the vehicle be stolen and then started. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It guards you against key cloning or hacking, Autowatch Ghost Immobiliser Fitting and even key theft. The only way thieves could steal your car is physically towing it away, and even then they would not be allowed to drive it.

Ghost uses buttons on your vehicle, like the indicator stalk, the steering wheel, as well as the doors, to generate a unique PIN code which must be entered in order to use your vehicle. This is not required to use additional hardware, such as a key-fob and can last up to 20 presses long. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals so thieves are not able to make use of sophisticated RF scanning or code grabbing techniques to discover that the security system has been installed.

Ghost is more difficult to get rid of than car alarms that require disarming using the buttons. This makes it a great complement to a GPS tracker which helps locate your car after it has been stolen.

Override of emergency PIN code

You don't have to look very far on social media to find stories or videos of vehicles that have been stolen with the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original keys.

The Ghost immobiliser has been designed to stop this and provide you with an extra layer of security in order to keep your vehicle from being targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN must be entered along with your original key fob in order to prevent the vehicle from getting started. The unique override PIN is on the black card you will receive after installation. It is simple to remember since there are no LED indications.

The device is hidden in the wiring of the vehicle and does not emit radio signals. Therefore, it cannot be detected using diagnostic software which can identify the security system you have installed. This makes it a great alternative to the tracking device.

Contrary to other security systems which use a relay in engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending an electronic block of commands for both the ECU and the engine.

These systems can also be linked to a separate analogue alarm immobiliser, tracker or alarm. This should be specified prior to the installation. They also work with service/valet modes and is a great alternative to a tracker device when you take your car into the dealer for an electrical problem.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen from owners without keys. With easy access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to take your joy and pride. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys were cloned or your car has been stolen.

It directly communicates with your car's ECU (Engine Control Unit) through the data loop called CAN. It's completely silent since it doesn't use radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to get around the system since only the correct PIN code will allow the engine to start.

The device is hidden inside your vehicle and is accessed by existing buttons on your steering wheel, the centre console and door panels. A unique & changeable PIN code sequence up to 20 digits has to be entered prior to being able to start your car.

This is the first aftermarket CAN bus immobiliser that has been created. It can prevent your vehicle from being driven or even started when you don't enter a PIN number first. If the device is armed and you try to drive away, it will display an indicator on your dash, which will flash on a regular basis for approximately 300m. If you type in your PIN code at this point, it will deactivate the anti-hijack device and your car will continue to drive in the normal way. If you don't enter your PIN at this point the indicator will continue to flash and will require a new pin code every time you try to start your car.