Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or window repair decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However, if you have double-pane windows that are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the property until a professional comes out and fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is large, you might want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in place.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need close your window and do a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC Window Repair is difficult to open, or if it blows open with the breeze. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to change the hinges on a window, but it's easier if someone else helps hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to offer assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges can also become misaligned due to wear, causing a gap where the sash meets frame. If they're beyond repair, it may be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it is possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is essential to remember that all windows will eventually get worn out and it may be cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult a professional immediately.