How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to add the second key. It requires dealer service with the handheld computer known as Tech-2. A new key and transponder have to be purchased and programmed to the car.

Make sure to rotate your keys in order to prevent one from deteriorating faster than the next. This will also ensure that your keys remain in pristine condition.

Replacement Case

As opposed to the traditional Saab keys of the past keys, the modern key fobs contain electronics which makes it more difficult to copy. That has made car theft a lot more complicated than it was 20 years ago. It also makes it more expensive to replace keys lost.

Every owner of a Saab 9-3 must have at least two working keys. It is costly to replace a lost key as it requires replacing the CIM module, and changing the locking cylinders. Dealers usually charge between $100-$200 for this.

There are several ways to get around these high cost. Some parts retailers will find the code on a spare key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade from metal for just a fraction of dealer cost. The key must be the exact same as the original in order for it to work in your vehicle.

You can also change the case yourself by following these steps. You will need a flathead screwdriver along with some patience. With the screwdriver, slowly pull the plastic apart and then separate the emergency key from the case. When the case is opened take the electronics out and put them back in the new case. Make sure to insert the correct badge and key back into the case, as well.

Replacement Battery

The replacement battery for the Saab 9-3 is a cheap component that can be replaced easily and quickly. This YouTube DIY video user Cyclone Cyd explains how to replace the remote key fob battery in only four steps. This tutorial should work for any modern saab key fob however the procedure might differ slightly.

The button is normally located near the Saab logo on the back of the fob. This is usually located just below the saab key fob programming logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver through the small hole on this button. This should be sufficient to let the fob case open so that you can change the battery.

After you have installed the new battery CR1632, you are able to restore the remote key fob. Then, you can program it into your car. The procedure should take no more than an hour or less. It's a very easy process that does not require any special equipment.

The process can be a bit more complex if you lose your key, but it's possible. The dealer has to read the car's VIN and then order a replacement key blade and TWICE module with the proper unique code. After that, they'll need to cut the replacement key and then program it with the latest software tool known as MDI.

Key Replacement Fob

The key fob has an internal battery that is used to lock and unlock your car. The batteries last for a certain time and will eventually go out of service. This is a typical issue that happens with all cars and the good news is that you can change the batteries on most key fobs and not have to replace the entire case. You can purchase replacement fobs on Amazon that have all the electronics already installed, so you can simply open the case and replace the batteries in the original case. It's important to note that you'll need remove the emergency key first. you can do this by inserting the small screwdriver flathead into the slot located in the middle of the case. The case will split as you move the screwdriver around it.

When you are ready to replace your keys, make sure you have spare keys, as this can reduce the total cost by a substantial amount. If you have an extra key, ask the dealer to cut the key and program it for your vehicle. This is less expensive than purchasing a new fob.

It is possible to add another key to your car if you don't already have one, but it requires a great deal of research and effort. The cost of adding a second key is several hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

Unlike earlier Saab cars, the modern saab Key Replacement bristol 9-3 models use an upgraded alarm system that is built on a key code. If you lose your only key, it may be costly to replace it with another one since the car must have a special computer added and also be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program the new key when they are not able to complete the task.

If you've lost the only working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge you a premium price for it. We can reprogramme the existing EEPROM on your car's computer to make it prepared for a new key. This will save you more than 50% off the cost you would pay an auto dealer.

If you've been an owner of a 03-11 SAAB 9-3, you likely know that the ignition key isn't all that robust. They can get extremely sticky, and the buttons can be ripped off from time to time and you should think about buying a new one if the one you have isn't performing as it should. The good news is that replacing the ignition key isn't as complicated as it seems and is fairly easy to do using the appropriate tools.